A table lamp with a ribbed pleated shade that has a slightly concave barrel profile — narrow in the middle and wider at the top and bottom. The vertical ribbing diffuses light evenly through the translucent walls, casting a warm glow without harsh shadows. A tapered conical base keeps the overall form clean and grounded. Inspired by mid-century modern and retro style.

PRINTING & ASSEMBLY• Print-ready and tested.• Support-free design.• Fits standard E26/E27 sockets (hole diameter 41 mm; can be used as a replacement shade for most home table or pendant lamps) and standard E14 socket with adapter (included in files; hole diameter: 28 mm).• Supports printing with PLA, PETG and other standard filaments.• Assembles easily without glue or screws.

DIMENSIONS• Shade: height: 160 mm (6.3 in), width: 192 mm (7.6 in)• Base: height: 180 mm (7.1 in), width: 78 mm (3.1 in)

PRINT TIMEDepends on printer and print settings. For standard settings on a Bambu Lab A1:• Shade: ~4h 45m (shade 3h 20m + insert 1h 30m + topper 55m)• Base: ~5h 15m

WEIGHTDepends on printing settings. Using the recommended settings: shade with insert and topper ~165 g (95g + 30g + 40g), base ~110 g.

MODULAR SYSTEMMix and match filament colors or pair this model with other interchangeable bases and shades from my profile. Follow my page for regular modular design updates.

WHAT'S INCLUDEDFiles for Lamp Shade and Base:• STL — 5 files (Shade + Shade Insert +Shade Topper + Base + E14 adapter), print-ready (tested and verified on Ender 3 S1)• OBJ — full lamp assembly (Shade + Insert + Topper + Base combined), for import into Blender, Cinema 4D, or any 3D software• 3MF — 5 files (Shade + Shade Insert +Shade Topper + Base + E14 adapter), pre-configured print settings for Bambu Lab A1 (sliced in Bambu Studio — just open and print).

Use LED bulb ONLY.

A lamp cord with E26/E27 or E14 socket is required (not included). Search plug in lamp cord kit E26 or plug in lamp cord kit E14 on Amazon or your local hardware/lighting store.

•• For personal use ONLY. Resale of files or printed objects is not permitted.••

Any questions? Feel free to ask!

Visit my profile & follow for more designs — new models added regularly!

PRINT SETTINGS (recommended): • Shade, Shade Insert: VASE MODE (spiralize outer contour), layer height 0.2 mm, layer width 0.6 mm (I use nozzle 0.4 mm with extrusion width 0.6 mm), top layers 0, bottom layers 6. • Base, Shade Topper: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you can use from 5% but the base will feel lighter and less solid), top layers 5, bottom layers 5, 2-3 outer walls (perimeters), fuzzy skin for Base. (Warning! Do not apply fuzzy skin to the threaded parts of the base. You can also print the entire base without fuzzy skin). • No supports needed. • Use transparent and translucent filaments for greater brightness and a colorful light effect • All STL, 3MF files are already oriented properly (base should be printed upside-down).