This 3D printed table lamp pairs a cylindrical hobnail bubble lampshade — with a raised bobble texture in a diagonal diamond grid — with a ribbed fluted pedestal base. The contrast of textures makes it a standout piece for Nordic, Scandi, or cottagecore interiors, equally perfect as a bedside lamp or ambient accent light. Prints in PLA, no supports needed, the shade is fully optimized for vase mode. Shade and base assemble without glue. A clean, satisfying decorative home print for any minimalist space.

DIMENSIONS• Shade: height: 170 mm (6.7 in), width: 163 mm (6.4 in)• Base: height: 150 mm (5.9 in), width: 96 mm (3.8 in)

WEIGHT Depends on printing settings. Using the recommended settings: shade ~80 g, base ~200 g.

PRINT TIMEDepends on printer and print settings. For standard settings on a Bambu Lab A1: • Shade: ~2h 20m • Base: ~6h

PRINT SETTINGS (recommended):• Shade: VASE MODE, layer height 0.2 mm, layer width 0.6 mm (I use nozzle 0.4 mm with extrusion width 0.6 mm), top layers 0, bottom layers 6.• Base: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you can use from 5% but the base will feel lighter and less solid), top layers 5, bottom layers 5, 2-3 outer walls (perimeters).• No supports needed.• All STL, 3MF files are already oriented properly (base should be printed upside-down).

FEATURES• Print-ready and tested.• Fits standard E26/E27 socket. • Mix and match filament colors for the shade and base for a personalized look.• Designed as a standard size and can be used as a replacement shade for most home table or pendant lamps (please check the measurements to ensure it fits your specific lamp).• All lampshades and bases are part of my modular system (they are compatible with each other shades and bases from my profile and can be combined in any configuration).

WHAT'S INCLUDED:Files for Lamp Shade and Base:• STL — 2 files (Shade + Base), print-ready (tested and verified on Ender 3 SE)• OBJ — full lamp assembly (shade + base combined), for import into Blender, Cinema 4D, or any 3D software• 3MF — 2 files (Shade + Base), pre-configured print settings for Bambu Lab A1 (sliced in Bambu Studio — just open and print).

Use LED bulb ONLY.A lamp cord with E26/E27 socket is required (not included) — available at most hardware or lighting stores (for example:
for the US https://amoz.onl/4yY, for Europe https://amoz.onl/4yW )

•• For personal use ONLY. Resale of files or printed objects is not permitted.••