FULL CAR PACK NOW LIVE! - https://www.cgtrader.com/3d-model-packs/kyosho-lazer-zxr-zxrr-full-car-pack-with-some-mod-parts
Battery clamp and post for the Kyosho Lazer ZX/ZXR/ZXRR series.This is designed to be CNC cut, the post 3D printed BUT you could potentially print both. Choose your filament carefully. I have printed both in ASA and Polycarbonate and cut the strap from Carbon FIbre. I found ASA to be the best for the post, Polycarbonate was difficult to get the screw all the way in but was easier when the screw was heated above 100 degrees.Print the post slowly or it wont be perfectly round, print it upright and you wont need support. I believe the screw hole in the base is around 2.5 - 2.8mm for a self tapper.Please see my Youtube video with my Lazer files on so you can see what is possible with them and you may find it helpful for certain things - https://youtu.be/A3WvQG3Msh0?si=osWnvfyYB94u8PTG