A soft mushroom silhouette with a rounded olive body, a terracotta cap and nine naturally spaced cream spots. PEBBLE brings a playful accent to a desk, shelf or bedside table while keeping small everyday items together.

Choose how you print the colored lid. The glue-in version works with a single-material printer: print the numbered inserts separately, align each offset key and glue them into the matching pockets. Small seating pads set their depth. The multicolor version keeps the cap and cream spots together as material volumes for compatible filament-change workflows. A plain lid is also included for painting or a monochrome finish.

DETAILS

• 100 mm maximum diameter × 106 mm assembled height.

• Body: 80 mm diameter × 58 mm height; 2.4 mm nominal walls/floor.

• Hollow lid with a nominal 2.0 mm crown shell, reinforced spot pockets and an underside access opening.

• Actual CAD rounds on both edges of the body mouth.

• Nine numbered glue-in inserts with flat printable backs and orientation keys.

• Separate body, lid and insert layouts, plus a small fit-test coupon.

• STL, 3MF, FreeCAD, Blender, OBJ, FBX and GLB files.

• English and Turkish printing/assembly guidance.

PRINTING

The glue-in inserts are designed to print flat-back-down without supports. The body and lids require supports in the supplied orientations. Read the included guide, print the fit coupon first and select your own printer/filament settings. For multicolor printing, assign the lid's ten volumes to two filaments and configure your machine's purge workflow.

Models digitally checked; not physically test-printed. Fit, support removal and adhesive performance require verification on a real printer. Images are renders of the actual model, not photographs of a physical print. The fine joint around glue-in spots is intentional.