Asymmetrically placed [Physically Timed] Gyroscopic Mass, inside a Motorized Aerodynamic Gyroscopic Modular disc, if that makes sense. well it might in a second, if you see what it looks like when placed centripetally into another holder form.

Here the Asymmetric gyroscopes are all centripetally placed, around a perfect center inside the round holder form, able to house various other equipment. This is what 16 asymmetric gyroscopes look like radially placed. 16 should be enough to achieve lift. there are slits made into the gyroscopic discs, perhaps we just have to blow on them to give them a little extra, a little change in the forces output direction. If money isn't a thing, you know what would be better than 16 gyros? 48 gyros would be a lot better for stability and load balancing and carrying. A couple of good perhaps even rubber spacers to keep it all together, a couple of battery units per gyro, the sky is the limit. And it just looks better, all these gyros, counter spinning, centripetally, radially, a beauty to behold I'm sure, i only made the windows for aesthetic reasons, they can be sealed off to lessen resistance a lot. the motors are all tucked in safely as well, no bird problems.

Top Front would be a really nice place for a pilot, he has to have nice wide angle view down over the nose of the craft, overlayed on top of a 360 virtual view around the craft inside his Hmd. Added another spacer ring, keeping things together. looks nice and might be able to hold more batteries or cargo whatever. Made some nice Mass Balanced Gas Tanks as [Anti] Ballast spaces, they could help lift the craft, and or help power it when converted to electricity or motion/rotation, depending on what type of gas and or motors we use. They can even still be enlarged greatly, but i really do not think that is even necessary, i mean, look at them compared to the ships size already. Think of the amount of gas, or even fuel could be taken, just keep all fuel levels balanced the same in each similar container spaced evenly for a reason.

Indicated the red and blue side of each gyroscope, once lift is achieved, and not all gyroscopes are needed for gaining or maintaining lift anymore, one of the two motors could switch to generator mode, creating electricity from the generated rotation, like from a flywheel containing stored kinetic energy. Even selected gyros could have both motors switch to generator mode if more electricity was needed on board. the motor must spin the wheel, in order to achieve lift, which is what we want anyway, then from having to spin the axle on one side anyway, we can directly use the same rotation, the same motor, the same properties, to instantly gain back electricity from the already needed and generated motion.

Added some landing gear, added a disembarking platform, added some lights, worked on the bottom part a bit. Added a nice pilot space in the top front, as well as the telescopic bottom platform poles, some landing gear storage boxes above the gear inside. Added the central top and bottom space for a crew, 4 bent screens can be used to project the outside of the craft, all around, inside.

The cylindrical Masses, fixed inside the gyroscopes, can be of any matching, highly dense materials, depending on the mass of the rest of the ships combined mass. The masses are pushed up, electrically during half the cycle, to above the ships center of mass, and then fall down again freely, to below the ships own, center of mass.

Decided to name her: Alexia Ariane.

By [ Dutch Industrial Space Company ].