Extensive Super detailed catenary set for H0-scale models of Swedish Era II, III and IV. Commonly referred to as riveted Old style.All items are designed, tested and verified to be used to carry the over-head wires on a H0-scale Model Railroad. The system works perfect together with Märklin, Roco, Peco, Viessmann, Sommerfeldt and the other main brands of track- and catenary systems in the market.

Ready-to-print super detail items set for Model Railroad in H0-scale. All neccesary preparations are made to simplify print including correct supports.Simply download, un-zip, save to USB and print. Enjoy!

The models are developed and test printed on the following 3D-printers to verify function, detail and printability:

• Anycubic M5s Pro
• Anycubic Mono M7 Pro

The following resins were used during development and test prints:

• Siraya tech build fast gray
• Siraya tech navy gray fast gray.

Use the following link for best price of your Siraya tech purchases: https://siraya.tech?sca_ref=7661655.3Eey6cZCQb

Use the following link for best price of your Anycubic purchases: https://store.anycubic.com/?ref=zwjjfwob

at the same time as you support the Modelrailroad3D design work.

IMPORTANT INFORMATION FOR BEST PRINT QUALITY AND TO AVIOD WARPING / SCEWING:

• SLICE model using 0,03mm LAYER THICKNESS.
• WASHING: Wash all items clean from resin preferrably in a washing mashine 6-8 minutes (Anycubic Wash & Cure 2.0)
• POST CURING: Leave all items to dry after wash properly. Preferrably over-night / 24h. All sides, including inside surfaces, MUST be exposed to the UV-light. Recommended time: 4 minutes.
• Paint the details immidiatly after post-curing using a primer. We recommend TAMAIYA Surface Primer Fine Gray.