This model was created as a spinoff from my CyberTruck RC model.It's a collaborative project between myself and AndysTechGarage with printing assistance from Tangible Creative.This was inspired by a photoshopped image by some clever person. So I had to have it. And now you can too.

It shares features with the regular Cybertruck like the Drive system and steering, but the rest is unique to this time machine.A bigger motor is needed compared to what I used, but I do provide different motor mounts.I will gladly build custom mounts if you have issues, so please let me know.

Here are some of its features:

• Detailed instructional assembly PDF.
• No supports should be required on most parts.
• Clips for easy assembly, so minimal hardware is required.
• Innovative differential unit.
• Two gear options.
• Multiple motor mount options for different motors.
• Fully 3D printable.
• Working doors. Servo or manual operated.
• Working tailgate.
• Working steering & steering wheel.
• Space for LED's on the front and rear.
• Internal lights - Dashboard, Time circuits, Flux capacitor & other.
• Internal seats and dashboard.

Hardware required for this build (Also listed with the parts):

AXLE & DIFFERENTIAL BEARINGS (X6)

• 22mm Outer Diameter X 8mm Inner Diameter X 7mm height

IDLE GEAR BEARING (X2)

• 15mm Outer Diameter X 10mm Inner Diameter X 4mm height

WHEEL SCREWS (X2)

• 12mm Length X 3mm shaft width X 6mm head width

DIFFERENTIAL LOCKING SCREWS (X2)

• 7mm Length X 2.5mm Shaft width X 5mm Head width (Countersunk)

MOTORS THAT FIT THE TWO MOTOR MOUNT OPTIONS:

• 27.5mm Diameter X 33mm Length 12V Motor
• 23.8mm Diameter X 35mm Length 12V Motor

RC RECIEVER (of your choice to fit)

ELECTRONIC SPEED CONTROLLER (of your choice to fit)

12V BATTERY PACK (to fit rear of truck)

LED's White X 15 (if all slots are used)

LED's Red x 2

I hope it gives you as much joy building it as I had making it!Enjoy!