STL files of a cessna 337 skymaster scale model Dimensions :lenght :24 cm - 9,4 inchswingspan : 31 cm - 12,2 inchsSCALE : 1/ 38

The Cessna Skymaster is an American twin-engine civil utility aircraft built in a push-pull configuration. Its engines are mounted in the nose and rear of its pod-style fuselage. Twin booms extend aft of the wings to the vertical stabilizers, with the rear engine between them. The horizontal stabilizer is aft of the pusher propeller, mounted between and connecting the two booms.[1] The combined tractor and pusher engines produce centerline thrust and a unique sound.

SETTINGSThis model has been designed from scratch to be realistic but also easy to print and assemble.Print settings:

• Nozzle width: 0.4mm
• Layer height: 0.2mm
• Outer walls: 2
• Bottom layers: 3
• Top layers: 5
• Infill 10 to 20%
• Fan : 20 to 40 %
• ,Adhesion : Brim for WINGS (04,05,06,07) and FWD fuselage (01)

The Cessna 337 Skymaster is arguably the most commercially successful so-called push-pull attempt, at least in terms of numbers built. And although the 337 Skymaster isn’t the most popular twin ever marketed, it’s done just fine for itself and has achieved its primary goal: eliminating asymmetric thrust and simplifying the pilot’s workload in the event of an engine 

UPDATE 26/05/2026add parts : -100- cessna 337 : fully assembled file of the cessna 337 except propellers -01-FUSELAGE FWD v2 : add cavity for engine's cooling