DET-0032 Harbour Detail set H0-scale 3D print model 3D print model

Detail set of 19 items for 3D-print for harbour areas. Ready-to-print super detail items set for Model Railroad. Simply download, un-zip, save to USB and print. Enjoy!

The models are developed and test printed on Anycubic Photon Mono 4k, M3, M3 PLUS and Photon Ultra DLP printer to verify function, detail and printability. The Print files (with correct supports, exposure time, lift speed and heights) are included and all neccesary preparations are made to simplify print. The following resins has been tested and verified to print these models:The following resins were used during development and test prints:

• Siraya tech build fast gray
• Siraya tech navy gray fast gray.

Use the following link for best price of your Siraya tech purchases: https://siraya.tech?sca_ref=7661655.3Eey6cZCQb

Use the following link for best price of your Anycubic purchases: https://store.anycubic.com/?ref=zwjjfwob

at the same time as you support the Modelrailroad3D design work.

IMPORTANT INFORMATION FOR BEST PRINT QUALITY AND TO AVIOD WARPING / SCEWING:

• SLICE model using 0,03mm LAYER THICKNESS.
• WASHING: Wash all items clean from resin preferrably in a washing mashine 6-8 minutes (Anycubic Wash & Cure 2.0)
• POST CURING: Leave all items to dry after wash properly. Preferrably over-night / 24h. All sides, including inside surfaces, MUST be exposed to the UV-light. Recommended time: 4 minutes.
• Paint the details immidiatly after post-curing using a primer. We recommend TAMAIYA Surface Primer Fine Gray.

*The Editorial licence of course includes unlimited printing for your own Model Railroad. However, the 3D models provided in this set must NOT be used for commersial production or re-sale of the 3D-models.