D
djolympusmons
Been following this artist for a long time on instagram. i love every part of his art. such beautiful themes and creativity, truly amazing work
Useto navigate. Pressescto quit
50mm Wraith 3D print model
Description
3D model descriptionWraith for Necropolis set, Scale is 50 mm, base 40 mm.You may 3D print this for personal use, but commercial sales of physical prints are prohibited
3D printing settingsMachine: Printed on the Elegoo Saturn 3 Ultra with standard photopolymer resin, Resolution - 11520 x 5120 px. Size - 218.880 x 122.880 x 260.000.
Print Settings: Layer height - 0.050 mm, Bottom Lift Distance - 3.000 + 4.000
Bottom Later Count - 2, Lifting Distance - 3.000 + 4.000
Exposure Time - 2.500 s, Bottom Retract Distance - 5.500 + 1.500
Bottom Exposure Time - 35.000 s, Retract Distance - 5.500 + 1.500
Transition Layer Count - 8, Bottom Lift Speed - 320.000
Transition Type - Linear, Lifting Speed - 90.000 + 320.000
Transition Layer Interval Time Difference - 3.61 s, Bottom Retract Speed - 320.000 + 90.000
Waiting Mode During Printing - Resting TimeRest Time Before Lift - 0.000Rest Time After Lift - 0.000Rest Time After Retract - 1.000
Matching Resin Mode - Standard Resin_Normal
Advance
Bottom Light PWM - 255 /Light PWM - 255 /Picture Grayscale - 255
Anti-aliasing - None
Once done printing, use gloves and Remove supports before wash. For complicated issues with supports, use X-Acto knife. Downloads also comes with original model to customize supports for customers. After wash Cure the models in a curing station for approximately one minute and thirty seconds. All models were imported and printed from Chitubox basic.
Similar Models
to 50mm Wraith
Users who bought this item also bought...
