Death Knight 41mm 3D print model

3D model descriptionDeathKnight model for Necropolis theme, model size 42 mm,Base size 32 mmYou may 3D print this for personal use, but commercial sales of physical or digital prints are prohibited

3D printing settingsMachine: Printed on the Elegoo Saturn 3 Ultra with standard photopolymer resin, Resolution - 11520 x 5120 px. Size - 218.880 x 122.880 x 260.000.

Print Settings: Layer height - 0.050 mm, Bottom Lift Distance - 3.000 + 4.000

Bottom Later Count - 2, Lifting Distance - 3.000 + 4.000

Exposure Time - 2.500 s, Bottom Retract Distance - 5.500 + 1.500

Bottom Exposure Time - 35.000 s, Retract Distance - 5.500 + 1.500

Transition Layer Count - 8, Bottom Lift Speed - 320.000

Transition Type - Linear, Lifting Speed - 90.000 + 320.000

Transition Layer Interval Time Difference - 3.61 s, Bottom Retract Speed - 320.000 + 90.000

Waiting Mode During Printing - Resting TimeRest Time Before Lift - 0.000Rest Time After Lift - 0.000Rest Time After Retract - 1.000

Matching Resin Mode - Standard Resin_Normal

Advance

Bottom Light PWM - 255 /Light PWM - 255 /Picture Grayscale - 255

Anti-aliasing - None

Once done printing, use gloves and Remove supports before wash. For complicated issues with supports, use X-Acto knife. Downloads also comes with original model to customize supports for customers. After wash Cure the models in a curing station for approximately one minute and thirty seconds. All models were imported and printed from Chitubox basic.