This dome pavé pearl pendant CAD model is structured as two casting components — a hemisphere dome cap and a rectangular pavé bail — connected via a standard jump ring post-casting. The dome cap carries the full 60-stone graduated pavé layout across its curved crown surface, with stone sizes ranging from 1.3 mm to 1.8 mm distributed across four groups. The open lower rim of the dome cradles a 10 mm round pearl, which projects below the cap edge and remains exposed for full pearl visibility. The rectangular bail runs a 5-stone linear pavé column along its vertical face, creating a secondary diamond zone above the dome.

The dome cap geometry is DLP/SLA printable with a smooth outer convex surface and no undercut risk on the exterior face. Inner dome cavity orientation requires standard support placement during resin printing. The jump ring connector is a standard cast or fabricated finding — no specialized assembly tooling required. This jewelry CAD model delivers a high-specification production asset: 0.818 CT total diamond weight across 60 stones, full multi-metal weight data, and compatibility with both Rhino 7+ and JewelCAD 5.x production workflows.

The dome pavé pearl pendant CAD model supports multi-pearl-color SKU production without file modification. Tahitian black, South Sea golden, and Akoya white pearls all seat correctly within the open lower rim cradle at 10 mm round diameter.