RC Tipper Trailer 3D print model

Extendable tipper trailer

Build your own extendable tipper trailer for your 1/14 rc trucks!you can extend this trailer 100mm with using a actuator, you can also lift the front axle with a servo.

Build manual is included and some metall work has to be done to make this trailer.Mostly m3 screws are used, for the axels you will need 5mm threaded rods and m5 locknuts.it also uses 3mm led diodes as light.

Hope you will enjoy this build, join my Facebook group and share your progress with me and the people in the group!

This is based on a Norwegian trailer, and it looks really well behind a truck!

Youtube video:https://youtu.be/IwQQh8CWkE8?si=VmCRSt4WRarRISea

Facebook:https://www.facebook.com/groups/1768113757036325

i DO NOT RECCOMEND OVERFILLING IT SO IT CANT LIFT THE SAND.

!!READ COPYRIGHTS LAWS BEFORE BUYING!!What is not allowed:

No commercial use or public sharing of the 3D model;No modification or adaptation of the 3D model for public sharing or sale;No distribution, SALE, donation or exchange of the digital files of the 3D model!

3D printing settingsminimal use of support

can be printed on 25x25x25