rc NIGHTSEEKER boat, designed by me.

uses one 540 motor and servo.

needs 2mm screws and glue.

you can use any 540 motor and esc you want.

the boat is in two pices and needs to be glued togheter.

partlist:

rudder x2 ( 75mm):https://www.aliexpress.com/item/4000017721059.html?spm=a2g0o.order_list.order_list_main.206.36a018020bWuhv

driveshaft and propeller (L25cm 025-4x3.18mm):https://www.aliexpress.com/item/32468832540.html?spm=a2g0o.order_list.order_list_main.210.36a018020bWuhv

steering rod 1x (200mm):https://www.aliexpress.com/item/32723438808.html?spm=a2g0o.order_detail.order_detail_item.5.7db6f19cgtmVJ4

heatsink:https://www.aliexpress.com/item/32723438808.html?spm=a2g0o.order_detail.order_detail_item.5.7db6f19cgtmVJ4

Remote Control w/ Receiver:https://www.aliexpress.com/item/1005002492080867.html?spm=a2g0o.order_list.order_list_main.370.36a018020bWuhv

3D printing settingsneeds 250x250x400 printer, if not you could probably split the hull one more time.

use support on some parts.