Please note the G90 Expedition Suite is SOLD SEPARATELY. This body is for the CR18P 6x6 chassis.

6x6 1/18 is finally here. The G90 Sleeper Cab has been re-engineered for the CR18P chassis, packed with new and smarter features.

The cab is designed for stock geometry with a tyre to tyre width of 135mm, wheelbase of 165mm from front to middle axle, and 240mm from front to rear axle, and 60mm dia. tyres. It is recommended to use the chassis’ lower shock mounting position to raise the chassis for better fender clearance.

The new Squeeze and Latch body mounting system has been developed to make battery changing easier than ever, taking inspiration from the original hinged clipless mounting system. Simply squeeze the body locking latches to release, and swing the cab forward over the wheels.

There are also inner fenders and floors to mount electronics and improve realism. Adding to the realism, a detailed dashboard and steering wheel is included with this body, as well as pockets for cutout polycarbonate windows.

To keep up with the tradition of overlanding, we’ve included a roof rack and cab side ladders that can be bolted directly onto the cab. This will let you add expedition and offroading accessories to your build to truly stand out. Also included are 2 styles of bumper to further customise your rig.

Features and details included:All new Squeeze and Latch body operating systemInner fenders and floor for electronicsRoof rack and side laddersMagnetic doors for extra access2 styles of bumpersFunctional light bucketsDetailed dashboard and steering wheelOverland long, medium and square boxes are includedand more…

Please note the following stock items have to be removed to use this body:Stock cab and bedFront fendersESC/receiver and lightsChassis mounted fuel tanksRecommended to fit the stock sway bars to prevent excessive body roll

Be sure to check out the instruction manual and gather all required hardware for assembly.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

.DXF window outline files are included with this body.Assembly instructions:View the link below to download the assembly instructionshttps://www.aheadrc.com/manual

All of these files are for personal use only. DO NOT in any way redistribute, sell in physical or digital form, or use for AI purposes.

FDM printing:PLA+ or PETG filament0.16-0.2mm layer heights30-50% infill densitySupports are necessary