Please ensure your printer is able to print larger than 205x245x210mm.

Please note the fuel carrier in the pictures is sold separately.

Aftermarket front shock towers and panhard mount are required. All inner fenders need to be removed before installing.

If you’re looking for a more modern and off road capable styled truck, then this will be perfect for your next project!

The TGA front cab is huge in real life, and this is properly reflected by its sheer height at 295mm from ground to roof. This also means however the TGA will never be the most capable rig for crawling extreme angles, it will however give a new, impressive and unique look that will look even more scale realistic when crawling offroad.

The TGA was designed to be used with a 1/10 crawler that uses 240mm outermost tyre to tyre width which makes it an excellent candidate for portal or widened axles. Increasing outermost tyre width beyond 240mm would give a more aggressive stance and stability. The industry standard 120mm tyre height will also work very well with the TGA.It was also designed to be used in tandem with the rear fuel carrier developed for the TRX6 platform.

Body mounts for the TRX4, TRX6, SCX10 ii, SCX10 iii, VS4-10 Pro, are included for custom build projects.

Some of the features and details included:Functional light buckets2 styles of grillesHinged mirrorsDetailed dashboard with steering wheelWipersDoor handlesSplit roof for easier printingand more

DXF files can be found here:https://www.aheadrc.com/dxf-files

Be sure to check out the instruction manual and gather all required hardware for assembly.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

Assembly instructions:View the link below to download the assembly instructionshttps://www.aheadrc.com/manual

Should you need any help, please do not hesitate to contact us!

FDM printing:PLA+ filament0.2mm-0.4mm layer heights20-30% infill densitySupports are necessary