Please note the G90 Sleeper Cab is SOLD SEPARATELY. This rear body attachment is for the CR18P 6x6 chassis.

The ideal pairing for the G90 Sleeper Cab for the CR18P 6x6.

The expedition suite is designed for the stock geometry of the CR18P 6x6m with tyre to tyre width being 135mm, wheelbase of 165mm from front to middle axle, and 240mm from front to rear axle, using 60mm dia. tyres.

It is recommended to use the chassis’ lower shock mounting position to raise the chassis for better fender clearance.

Unlike the Squeeze and Latch body operating system on the cab, the expedition suite is rigid mounted onto the chassis with 5mm fore and aft shifting space for fine tuning positioning over the tyres.

Inner flooring is included to let you build and configure your rig, by adding in furniture and accessories, turning it into a house on 6 wheels. To make accessing the suite easier, a magnetic roof is baked into the design.

To add a bit of extra detail and practicality, a hinged door is also added, which can be latched shut while crawling. Entering the suite from the door is also a set of grippy steps.

Rear wall mounted accessories are also included to help you get a head start on your overlander build.

Features and details included:Magnetic roof for easy accessSuite flooringHinged and latching doorWindow pockets for polycarbonate cutout windowsOverlanding accessoriesFunctional light bucketsand more…

Please note the following stock items have to be removed to use this body:Stock cab and bedFront fendersESC/receiver and lightsChassis mounted fuel tanksRecommended to fit the stock sway bars to prevent excessive body roll

Be sure to check out the instruction manual and gather all required hardware for assembly.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

.DXF window outline files are included with this body.Assembly instructions:View the link below to download the assembly instructionshttps://www.aheadrc.com/manual

All of these files are for personal use only. DO NOT in any way redistribute, sell in physical or digital form, or use for AI purposes.

FDM printing:PLA+ or PETG filament0.16-0.2mm layer heights30-50% infill densitySupports are necessary