The blue crawler, wheels, and tyres shown in the pictures are not included.

The 1/10 Offroad Expedition Trailer is a rugged companion for your 1/10 crawler, built to haul gear and tackle the trail with purpose.

Designed to pair with a standard 1/10 crawler chassis, the trailer works best with 110-120mm tyres. The axles are rigid mounted to the underside of the trailer and come in 2 heights to suit 110 and 120mm tyres.

Trailer hitches are included for the SCX10 ii, SCX10 iii, VS4-10 Pro, TRX4 / TRX6. The height adjustable rear bumper also comes in 2 different styles, one being compact for maximum clearance, and the other being full width to protect the body. The height adjustment allows for fine tuning to ensure compatibility across different body shells.

The trailer hitch mounts directly onto the included height adjustable rear bumper, which installs at the rear of the chassis; the same location as most stock rear bumpers. As a result, the original rear bumper must be removed to use this trailer hitch. Please note that most of our body shells are not compatible with the Offroad Expedition Trailer.

The trailer also comes packed with features and scale accessories:Full depth trailer internal volume for trail spares and extra battery packsMagnet mounted top can be removed and snapped back on for easy accessHinge mounted doors with latching door handlesAdjustable sliding posts that help keep the trailer level when parked on uneven terrainModular side mounted accessories allow the ladder, utilities box, and utility table to be swapped around8 functional light pods for 3mm LEDsFunctional rear lights buckets and lenses for 3mm LEDsRoof rack for extra storageRear spare tyre mount allows for 120mm full size tyre and wheel

Included accessories:Tyre inflatorTraction boardPortable generatorMedical boxFuel can (tall)Propane tankHigh lift style jackFridge with beverage cansFunctional expedition box pack (small, medium, long)Camping stove, kettle, pot, saucepan

Be sure to check out the instruction manual and gather all required hardware for assembly.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

Assembly instructions:View the link below to download the assembly instructionshttps://www.aheadrc.com/manual

FDM printing:PLA+ or PETG filament 0.12mm-0.2mm layer heights30-50% infill densitySupports are necessary