3D Printable version - Kit

Fubuki was the lead ship of twenty-four Fubuki-class destroyers, built for the Imperial Japanese Navy following World War I. When introduced into service, these ships were the most powerful destroyers in the world.

Commercial use license

Find non-commercial version here: https://www.cgtrader.com/3d-print-models/hobby-diy/other/ijn-fubuki-personal-license-1-100-scale

GENERAL INFO - The model was created based on blueprints, photos and historical documentation.

The model is divided into 144 Stl files, but some of these need to be printed several times. The number of copies to print is indicated in the STL file name.

Once printed they can be finished, assembled, glued and plastered where necessary and painted.

Motorboat and lifeboat are included

Assembly guide included

N.B. There are many little and tiny details. It's recommendable to use a resin 3D printer with a good print resolution.

This is a medium/high difficult 3D printing kit. You should be able to fix minor printing problems if you encounter any (depending on your slicing software and printer).

The model scale is 1/100.

The total length of the final assembled model is 1.2 meters.

ATTENTION Due to the large number of parts it could take a very long printing time with the consumption of a considerable amount of resin

You can use the OBJ or the FBX files as reference to assemble all the printed parts

For any difficult or question I am always available to give you assistance.

I would be very grateful if any of my models could help you to do a great job.