BATTLESHIP RN ROMA 3D Printable version - Kit(STL files update on 29-11-2023)

Commercial use license

Find non-commercial version here https://www.cgtrader.com/3d-print-models/hobby-diy/hobby-accessories/battleship-rn-roma-1-200-scale

GENERAL INFO - The model was created based on blueprints, photos and historical documentation.

The model is divided into more than 330 Stl files, but some of these need to be printed several times. The number of copies to print is indicated in the STL file name.

Two different hull versions included (one with keys to make alignment of the hull parts much easier, one without keys)

Motorboats and lifeboats are included

The bigger part fit inside a 10cmx10cmx10cm printable volume

Once printed they can be finished, assembled, glued and plastered where necessary and painted.

*N.B. There are many little and tiny details. It's recommendable to use a resin 3D printer with a good print resolution. *

This is a medium/high difficult 3D printing kit. You should be able to fix minor printing problems if you encounter any (depending on your slicing software and printer).

The model scale is 1/200.

The total lenght of the final assembled model is 1.2 meters.

ATTENTION Due to the large number of parts it could take a very long printing time with the consumption of a considerable amount of resin

You can use the OBJ or the FBX files as reference to assemble all the printed parts

High-resolution images of port side, starboard side and top view are also included for additional assembly reference

For any difficult or question I am always available to give you assistance.

I would be very grateful if any of my models could help you to do a great job.

You can explore more of my work or get more info directly from my website:

https://www.carlocestra.com/3dmodels_store/home.php