I created this 4 post car lift/ramp for the garage workshop on my 7mm/ft or 1/43 scale model railway layout.
Don't force your model mechanics to crawl around on the floor underneath the vehicles they are working on. Treat them to the proper equipment for the job! :)
The lift is made up of 6 separate parts - you will need to print 4 uprights (3 are plain and 1 has the control box and motor housing), 2 ramps, and the main platform. All of the parts are designed to be printed directly onto the buildplate.
The main platform is fully poseable at any height within the uprights.
L 122mm W 78mm H 51mm
I also have a selection of 7mm 1/43 scale garage workshop equipment available via the following links.
Fire Extinguisher https://www.cgtrader.com/3d-print-models/hobby-diy/other/fire-extinguisher-7mm-scale-1-43-o-gauge-model-railway-building
Air Compressor https://www.cgtrader.com/3d-print-models/hobby-diy/other/workshop-compressor-7mm-scale-1-43-model-railway-building
Tool Box https://www.cgtrader.com/3d-print-models/hobby-diy/other/workshop-tool-box-7mm-1-43-scale-model-railway-garage
Engine Hoist https://www.cgtrader.com/3d-print-models/hobby-diy/other/engine-hoist-1-43-7mm-scale-o-gauge-model-railway-building
I sliced the files in Lychee and printed on my Anycubic Photon Mono X using Siraya tech fast resin.