3D printable Beechcraft King air Trim Wheel for flight simulator.

Printed in two part (top & bottom)Requires hardware for assembly (3mm self tapping screws + M3 machine screws & nuts)Dimensions:Outside diameter = 200mmCenter hole diameter = 6mmFour flange mounting holes diameter = 3mm

• Dimensions may differ from actual King Air trim wheel as I do not have accurate measurements, if you are interested in this trim wheel and can provide accurate dimensions I will scale it properly.

Recommended print settings for 0.4 mm nozzle0.2 mm layer height At least 6 top and bottom layersAt least 3 perimetersAt least 25% infillNo supports needed