Beechcraft Flight Simulator Yoke Version 2
Beechcraft Flight Simulator Yoke Version 2 3D print model
  • Beechcraft Flight Simulator Yoke Version 2 3D print model_0
  • Beechcraft Flight Simulator Yoke Version 2 3D print model_1
  • Beechcraft Flight Simulator Yoke Version 2 3D print model_2
  • Beechcraft Flight Simulator Yoke Version 2 3D print model_3
  • Beechcraft Flight Simulator Yoke Version 2 3D print model_4
  • Beechcraft Flight Simulator Yoke Version 2 3D print model_5
  • Beechcraft Flight Simulator Yoke Version 2 3D print model_6
  • Beechcraft Flight Simulator Yoke Version 2 3D print model_7
1 / 8
Useto navigate. Pressescto quit

Beechcraft Flight Simulator Yoke Version 2 3D print model

Description

3D Printable Beechcraft style control yoke for home built flight simulator Dimensions : 254mm W 132MM H 53MM D Flange or 20mm shaft mount .stl files Able to be fitted with 6 push buttons and two rocker switches NOTE: Required print volume at least 260x140x50mm Needs assembling Requires 22 3mm self tapping screws

Recommended print settings: Infill - 30% Wall count - 3 (0.4mm nozzle) Top & Bottom layers - 4 Layer height - 0.2mm Supports - enabled

Write comment
S
serku
serku 2019-04-10 00:42:28 UTC
Hi, what would be the prefered length for the 3mm screws? Thank you!
P
pablonhernan
pablonhernan 2018-09-25 13:27:08 UTC
its possible to cut or edit the file? I need to print in 3d print with 20x20cm of base.
T
thatviaanguy
thatviaanguy 2018-09-25 14:28:41 UTC
Hi, If you would like to edit the file you would need to purchase the editable version.
Item rating
4 0
T
traveller24
traveller24 2024-04-11 22:25:37 UTC
Recommended
Am currently very busy and in addition am fairly new to 3d printing so have only printed the front of this model. The file was transferred after slicing without issue and I started the print. When I returned the following morning the printer nozzle had fouled part of the print and there was a mess. I restarted the print and everything went well until roughly 1/3 through the process. At this point the right handgrip shows a layering effect. This effect is throughout the right handgrip and fades as the layer travels to the left side. In addition the extreme top right part has lifted from the printer bed and although the printer continued to print and finished successfully there is a slight warp to the finished item. Overall the item so far is fair. When I print the rear half I will update this review.
Beechcraft Flight Simulator Yoke Version 2
$26.00
 
Editorial No Ai License 
Beechcraft Flight Simulator Yoke Version 2
$26.00
 
Editorial No Ai License 
T
thatviaanguy
(46 reviews)
Response 73% in 3.8h
3D Print Modeling
Hire me

3D Model formats

Format limitations
  • Stereolithography (.stl) (3 files)156 MB

3D Model details

  • Publish date2017-07-28
  • Model ID#751638
  • Ready for 3D Printing

Similar Models

to Beechcraft Flight Simulator Yoke Version 2
Help
Chat