These 3D printable models are wearable masks from The Nightmare Before Christmas.

Files contain pieces of the model (STL) ready to be 3D printed on 200 x 200 x 200 mm 3D printers and 3D model files that are not cut into smaller pieces (OBJ)

The model is meant to be post-processed after printing. This can be sanding, glueing, painting,...

SIZE

At 100% scale the mask dimensions are approx.:

Shock's mask

Width: 148 mmLength: 65 mmHeight: 254 mm

Lock's mask

Width: 155 mmLength: 56 mmHeight: 304 mm

Barrel's mask

Width: 255 mmLength: 45 mmHeight: 255 mm

You can scale the model according to your head measurements.

PRINTER SETTINGS

We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the models shell parts, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.

If you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com/preorder

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic.Here are some links to our website and social media where you can see more of our creations:

https://3d-mon.com/links/