On a holiday to North Wales, I visited Llandudno station, along Platform 1 there was a high brick wall. So I took some photos as It would be a good design to add to my collection.

In OO scale the wall is about 50mm tall and 4.3mm deep. The width of each section is 60mm, I have uploaded various lengths so you can print in 60mm, 120mm, or 240mm lengths.

This particular design is one-sided, I have also produced a double-sided version.

These have been designed at OO Gauge, 1:76.2 Scale,for HO Gauge print at 87%, 1/87 Scale,for O Gauge UK print at 175%, 1/43.5 Scale,for O Gauge America print at 158%, 1/48 Scale.for N gauge print at 51.49%, 1/148 scale. (Caution: I have not printed this model in N gauge so can’t guarantee its printability)

This design can be printed on a filament or resin printer (resin printer may be limited to 60mm or 120mm lengths when printing in OO scale. I have tested this design on a AnyCubic Photon M3 resin printer and a Bambu Labs A1 FDM printer (0.4mm Nozzle, layer height 0.08mm). I have also tested printing this design flat on the bed of my Bambu Labs FDM printer but would recommend using a 0.2mm nozzle instead for this orientation.

I use AnyCubic Water Washable Resin for most of my items but use AnyCubic ABS Like Resin for anything that needs to be stronger and tougher.

My website has lots of useful info.

use this link to join CGTrader and download my designs.

https://www.cgtrader.com/designers/PJD1974?referral_id=3218445