I have been designing a series of different railway lineside buildings and this is a building that I had seen at Yeovil Junction many times and thought I might model it at some point. Buildings like this I haven’t really seen modelled for model railways and it was an interesting building to model.

This model has been designed to be printed on a FDM printer and is approximately 170mm long, 42mm wide and 45mm tall.

This item has been designed at OO gauge, 1/76.2 scale.For HO Gauge print at 87%, 1/87 Scale,For O Gauge UK print at 175%, 1/43.5 scale,For O Gauge International print at 158%, 1/48 scale,For TT Gauge print at 63.5%, 1/120 scale,For N Gauge UK print at 51.5%, 1/148 Scale, (Caution: I have not test printed this in N gauge scale).

This item has been designed to be printed on a FDM PrinterThis item has been tested on a Bambu Labs A1 filament printer with a layer height of 0.12mm and a 0.4mm nozzle.As per normal with my designs, there is a balance between accuracy and printability, hopefully not affecting the look of the model too much.I used the following Filament: ELEGOO PLA+ Filament 1.75mm Grey 1KG - https://amzn.to/4r1qQIM (Affiliate Link)

use this link to join CGTrader and download my designs.

https://www.cgtrader.com/designers/PJD1974?referral_id=3218445