Model Railway - Cable Drum Jack and Stand 3D print model

Cable Drum Jack and Stand.

There are two versions, Jack and a Stand.These have been designed to go with my other items of Cable Drums, but this download also includes the 2m and 1.6m drums with cable and a bar is also part of the design so the drums it sits on the Jack or Stand. For my other cable drum designs use the following link.https://www.cgtrader.com/3d-print-models/hobby-diy/other/model-railway-cable-drums-with-and-without-cable

These items have been designed at OO gauge, 1/76.2 scale.For HO Gauge print at 87%, 1/87 Scale,For O Gauge UK print at 175%, 1/43.5 scale,For O Gauge International print at 158%, 1/48 scale,For N Gauge UK print at 51.5%, 1/148 Scale, (Caution: I have not test printed this in N gauge scale).

Examples in the photos were printed on an AnyCubic Photon Resin Printer

I recommend printing these items on a 3D resin printer to get the best resolution print, for larger scales you might be able to print them on a filament printer (Not tested). As per normal with my designs, there is a balance between accuracy and printability, hopefully not affecting the design of the model too much.

I use AnyCubic Water Washable Resin for most of my items but use AnyCubic ABS Like Resin for anything that needs to be stronger and tougher.

use this link to join CGTrader and download my designs.

https://www.cgtrader.com/designers/PJD1974?referral_id=3218445