Magazine for PCP carbines, FX - CROWN MKII - WILDCAT MKIII - MAVERICK - DREAMLINE CAL.22, 18 shots, this magazine is identical to the original FX, so its parts can be replaced in the original magazine

Used materials:• Spring wire 0.8 x 13.9 x 21.2 mm• 0.5x 5 x 3 mm wire spring• 3mm stainless steel billet• M4 x 12MM stainless screw (Allen socket, countersunk head)• M4 stainless steel hexagonal nut• O-ring 2mm inner ø, 5mm outer ø x 1.5mm thick (for the lid)•O-ring 3mm inner ø, 6.5mm outer ø x 1.78mm thick (nut hole)• ABS / PLA+ filament

3D PRINTING PARAMETERS• Layer height: 0.16 / 0.18mm• Line width: 0.4mm• Base filling: 50%• Wheel filling: 50%• Lid filling: 100%• Temperature: Extruder 240Cº / Printing plate 80Cº (PETG)• Printing Speed. : 50mm/s• Travel Speed. : 100mm/s• Retraction distance: 5mm• Retraction speed: 45mm/s• Support cantilever angle: 78º

Note: these parameters are for PETG filament, if using PLA or ABS modify the parameters according to your printer