Soldering iron holder (standoff) box

• Slides in from below and slides back and forth, two compartments.
• For the type of soldering iron holder as in the photo !!! There are slots for fixing with two screws.
• Box width 82.5mm long 129mm height 23mm.
• To put it simply - after bending the side walls of the stand by a couple of degrees inward, the box holds. It suits me, the box is kept in place with the load and does not fall down. If it is more complicated, there are grooves in the box for the amount of movement of the box forward and backward, under the M3 screw. that is, you need to turn two M3 screws into the stand from the sides to fix it in the grooves.

STL, STEP, F3D files. If the site lacks the source file you need, I will upload it to the site. Or I will send it to you personally.