This is a incredibly inexpensive and efficient way to crate a powerful (10W) wireless charger and to make it beautiful!Will charge any phone compatible with wireless charging and I have tested 3 identical internal boards for over an year

This is a model made to house this wireless charging board : https://s.click.aliexpress.com/e/o3s0OdT2

it's a single piece design ,it is made to be as thin, small and light as possible and will use a lot less plastic than a multi piece model

To make it is important to stop the print just before the first top layer is made , insert the board and continue the print .

Many slicer have a stop at layer function that will make the process extremely easy .

For any question or problem I will be more than happy to help.

IMPORTANT :

WILL NOT WORK IF THE BOARD IS NOT INSERTED DURING THE PRINT, There is no way to insert the board after the fact

this board is required : https://s.click.aliexpress.com/e/o3s0OdT2

the model has long bridging and a slower print and more cooling can be necessary

not every phone is compatible with wireless charging

3D PRINTING SETTINGSNO SUPPORTS OR THE MODEL WILL NOT WORK

any layer high will work but I prefer 0,1 to 0,2

the model has long bridging and a slower print and more cooling can be necessary

IS NECESSARY TO STOP THE PRINT TO INSERT THE BOARD , There is no way to insert the board after the fact