Energy efficient modelCommercial license: You can print and sell these models.A heating rod comes with a clamp which won't fit all the buckets, sometimes the rod will touch the bucket which will release toxins into the water and recrystallize, damage the shelf life of container. This mounting will safely keep the rod towards the center which will also increase the heating efficiency by uniform heating from center which will reduce the consumption of energy.Assembling: Remove the screw of the clamp and screw this mounting to the heating rod.

2 versions available:

1. Small to medium bucket holder,
2. Small to large bucket holder.

3D printing settings:

Slicer software: Creality slicer,

Printer: FDM / RESIN,

Filaments: PLA, PETG, ABS, ASA, PC.

Infill: 40% to 60%

Retraction: 3mm retraction speed 25

Nozzle Temp: 210 bed 90 for PLA (no glue stick/adhesive needed)

Support: Normal / tree,

Build plate adhesion: brim at least 5mm,

wall thickness: 1.2mm to 2mm,

Thank you,Have a nice day.

Regards,Sigma Designers.