A complete 3D-printable replacement for the hard-to-find VW Golf MK3.5 Cabrio steering column trim cover.Designed to match the OEM exterior appearance while offering improved printability, durability, and compatibility with the MK3.5 ignition and dashboard layout.

Key Features:

• Compatible specifically with MK3.5 Cabrio, which uses a unique warning lights position.

• Suitable for 32mm ignition diameters.

• Kit includes top and bottom trims.

• OEM reference matches (to the best available information):Top: 1H0 953 515 GBottom: 1H0 953 516 AC 01C

• Improved, reinforced geometry while keeping OEM exterior shape.

• Designed for FDM 3D printing with minimal issues.

• Uses M5 heat-set inserts (length 6 mm, outer Ø 7 mm).

• Requires 3 × M5 hex screws, length 35–50 mm.

Update Log15/04/2024

• Adjusted lever-clearance geometry
• Updated ignition appearance (closer to OEM)
• Added replaceable mounting clip (separate print)
• Updated top-cover orientation to reduce support usage

20/11/2025 – V25.42

• Improved cavity for the replaceable mounting clip
• Tighter M5 heat-insert holes
• SUP versions optimized for tilted printing at the ideal angle

If you are looking for the ready-to-use physical part, visit: additivelegacyparts.com

Recommended Materials

For optimal durability, use ABS, ASA, or other UV-resistant materials.PETG can be used but is best for cold climates or garage-kept vehicles.

Printing Tips

Use the SUP versions with built-in optimized supports and automatic ideal orientation. Or use the unsupported versions if you prefer to apply your own support strategy and printing orientation.

Need Help or Have Questions?

If you need help or run into printing issues, feel free to contact us:

Facebook: AdditiveLegacyParts

Instagram: @additivelegacyparts

We're always here to help. Happy Printing!