Discover a 3D-printable alternative for the elusive and pricey OEM Steering Column Trim Cover for VW MK3 with height regulation. As these original parts become scarcer and more expensive, our kit provides a cost-effective solution for your beloved vehicle.

- Key Features:

Suitable for 20mm ignition diameters.Kit includes top and bottom trims, catering to various MK3 models.Matches OEM references:Top Trim: 1H0 953 515 G 01CBottom Trim: 1H0-953-516 P 01CBottom Trim for Airbag Versions: 1H0-953-516

- Recent Updates (14/11/2023):

• Enhanced HD models for superior printing quality.
• Reduced gap between the steering wheel and the cover with a more substantial collar.
• Smoother edges for a polished look.
• Built-in supports to prevent production hiccups.
• Introduction of a bottom part adapted for 1st Gen airbag versions.

- Recent Updates (15/04/2024):

• Modifications regarding the interference with the levers.
• New ignition look ( closer to the OEM design).
• New mounting Clip, as used in the OEM Version, It has to be printed separately in the optimal orientation.
• The Top cover now is to be printed ( from top to bottom ) reducing the need for supports.

- Recommended Materials:

For optimal performance and durability, we recommend using ABS or ASA, or any UV-resistant material. PETG can be used but only suitable in colder climates or for vehicles stored in garages.

- Printing Tips:

Support Structures: Bottom Part requires supports. Adjust your printing settings accordingly.

Warpage Prevention: To combat warping, especially in the case of ABS, consider using low-warp ABS material.

- Need Help or Have Questions?

Encountering difficulties? Reach out to us instantly for assistance! Connect through Facebook (AdditiveLegacyParts) or Instagram (@additivelegacyparts).

We're here to assist you throughout the printing process. Feel free to get in touch for real-time support and troubleshooting.

Happy Printing!