VW MK3 Steering column 2nd Gen. Trim Cover (28 mm ignition / With height adjustment) Replacement Kit

A complete 3D-printable replacement for the increasingly hard-to-find VW Golf/Jetta MK3 steering column trim cover for height-adjustable steering columns (2nd Gen., 28 mm ignition). Designed to maintain the OEM exterior look while offering improved printability, durability, and compatibility.

- Key Features:

• Supports 28 mm ignition diameter (2nd Generation).

• Includes top and bottom trim pieces.

• Compatible with OEM references:Top: 1H0 953 515 L 01CBottom (Airbag versions): 1H0 953 516 AE 01C ; 1H0 953 516 AC 01C

• Improved, reinforced geometry while keeping OEM exterior shape.

• Designed for FDM 3D printing with minimal issues.

• Uses M5 heat-set inserts (length 6 mm, outer Ø 7 mm).

• Requires 3 × M5 hex screws, length 35–50 mm.

Update Log15/04/2024

• Adjusted lever-clearance geometry
• Updated ignition appearance (closer to OEM)
• Added replaceable mounting clip (separate print)
• Updated top-cover orientation to reduce support usage

20/11/2025 – V25.42

• Improved cavity for the replaceable mounting clip
• Tighter M5 heat-insert holes
• SUP versions optimized for tilted printing at the ideal angle

If you are looking for the ready-to-use physical part, visit: additivelegacyparts.com

- Recommended Materials:

For optimal durability, use ABS, ASA, or other UV-resistant materials.PETG can be used but is best for cold climates or garage-kept vehicles.

- Printing Tips:

Use the SUP versions with built-in optimized supports and automatic ideal orientation. Or use the unsupported versions if you prefer to apply your own support strategy and printing orientation.

- Need Help or Have Questions?

If you need help or run into printing issues, feel free to contact us:

Facebook: AdditiveLegacyParts

Instagram: @additivelegacyparts

We're always here to help. Happy Printing!