Project Voltron-Red

Project Voltron-Red 3D print model

Project Voltron-Red

  • some parts are same as green lion. 26-08-2020 updated body_10 for easier printing. fixed error for body_03,04. 28-08-2020 fixed missing hole in body_05 30-08-2020 fixed intersection problem at body_06 09-05-2022:fix filp face for Robo mode and lion mode Link of Lions:

https://www.cgtrader.com/3d-print-models/games-toys/toys/project-voltron-black

https://www.cgtrader.com/3d-print-models/games-toys/toys/project-voltron-green

https://www.cgtrader.com/3d-print-models/games-toys/toys/project-voltron-red

https://www.cgtrader.com/3d-print-models/games-toys/toys/project-voltron-yellow

https://www.cgtrader.com/3d-print-models/games-toys/toys/project-voltron-blue

https://www.cgtrader.com/free-3d-print-models/games-toys/toys/project-voltron-sword

X
x4alduezo
hello, I already bought the blue one, wanting to buy the other models, do you have color parts for the other ones?
L
lechuckgl
Red Lion is now complete! https://ibb.co/T2gVShC https://ibb.co/488DGQZ Honestly, I think this is one of the best designs for a 3d printed figure I've ever seen ! Alongside ToyMakr3D, this is almost like the stuff you buy in stores (and in some ways even better!!). I honestly don't know why it has so few downloads. You should post it to more sites and also add pictures of the final result to get to more people !! Congrats for an awesome model !!! I'll be bothering you a little bit more with the other lions if I hit a rock :P. Thanks !!!
candyasdf
candyasdf
hi, about the parts splited: the red lion is later design and i think it's better way to print it in 2 parts. lots of problem cause by FDM printing specially overhang. don't have pegs to join: yes you need to align and glue. because the parts are not temporary state(no need to seperate later) and not enough space to make a hole. and....lazy XD. really touching to hear you finish it and like it. let me know if any problem or any idea enjoy!
L
lechuckgl
Hi again: I noticed some parts for red lion are splited in 2 but for green lion are just one piece (maybe for easier printing witg less supports?): leg_L1 & leg_L2 (leg_L1 for green lion) or front_L01 & front_L02 (L_arm1 for green lion). Allllsooooo: leg_L1 & leg_L2 don't have pegs to join them the same way parts front_L01 & front_L02 have, so I'll have to align them and glue them manually.
G
gestalt73
Hey candyasdf, I've been having a great time printing out the parts for this model at 400%, but I see a problem with the fitment between body_06 and body_07. The interference between the two parts doesn't allow them to mate at the pivot/axle. Does the green lion use the same part files? https://i.imgur.com/Ik4f04n.jpg https://i.imgur.com/d3yqcua.jpg
candyasdf
candyasdf
hi sorry to waste your filament. body_06.STL is updated in body.zip pls take a look. thx!!
L
lechuckgl
I keep bothering you: I see that the green lion had 4 parts for the jaws, but the updated parts are only 2 (less articulation). The red lion has only 2 parts for the jaws as well. Is there a reason for this? Which version should I print?
candyasdf
candyasdf
hi, 4 parts for the jaws is early design for better grip and sharper head shape for lion. the updated one is make it close to the traditional style and better "hand" shape in robot mode. the updated 2 parts i recommend to print. and!! body_06.STL need update! pls check it in new zip. thanks!!
Item rating
9 0
Recommended
Incredible! I first saw the the black lion model 2-3 years ago (?) and thought it looked cool, but I was skeptical because there were a lot of cool looking 3D anime mecha models that, practically, weren't printable. Rest assured, this Voltron is NOT one one those. This is a fully 3D printable model/toy that is fully functional! The engineering and design is right up there with any toy you could buy in store; complete with joints, hinges, and sliding mechanisms. I purchased all 5 lion files, and the Red Lion was my first print (I thought I'd start small). I was completely impressed through every step of the print, fitment, and final assembly. Definitely worth the purchase. Please support the designer and lets make 3D printed mecha the new garage kits for the 21st century!
Project Voltron-Red
$5.00
 
Royalty Free License 
50% for Ukraine
Project Voltron-Red
$5.00
 
Royalty Free License 
50% for Ukraine
Response 73% in 37.0h
3D Modeling
3D Print Modeling
Low-poly Modeling
Rigging
Skinning
UV mapping
Hire me

3D Model formats

Format limitations
  • Stereolithography (.stl) (10 files)9.58 MB
  • IGES (.ige, .igs, .iges)21.7 MB

3D Model details

  • Publish date2019-07-24
  • Model ID#2044133
Help