1/72ADR-04-Mk.X Destroid Defender from Macross

• Design for DLP ONLY.

• A6 Decal include, pls print with white ink ALPS printer , or printing service like:https://www.bedlamcreations.com/request-a-quote/request-a-waterslide-decal-quote/etc.(OR you can ask me for help ;) )

• all parts are support ready.

• with 0.1mm tolerance for tight fit, 0.15mm loose fit.

• you can test with tolerance_test.stl provided first. (my result: tight: 2.8 fit 2.75,loose 2.7)

some part need clone and mirror with your slicer software. please read parts list in manual1

ABS like resin recommend, use around 170 ml, clear resin needed with few ml.

• #No hollow, No dig hole and No glue needed.
• #For easy support removing and size precision, do not over expose.

• #For best fitting, please clean up support surface.

• height: 15.6cm

• weight: 153g

polycap (PC) parts link:https://www.cgtrader.com/free-3d-print-models/hobby-diy/mechanical-parts/gunpla-poly-cap-132a

• you can find a link to lists what gunpla models are using same type of polycap.

• or, you can find and buy something like this: https://www.amazon.ca/Custom-Action-Figures-Detail-Movable/dp/B0B4S4ZCDW

• tested print with anycubic mono 4k.

• ALWAYS WEAR GLOVE WHEN WORKING WITH RESIN.

cheers