These are the STL files for a 3D printable boxing santa biped robot please visit instructables.com , 3D Printed Boxing Santa Biped Robot for further information and assembly instructions.

They have been arranged to print on a build surface of 150mm x150mmPrint the Head, Forearms and back cover clips file in white Print the Body ,Clips and battery, Arms feet hat , Back cover files in red for the best Santa look.Ideally it is best to print with a layer height of .2mm but .3mm works as well.No supports are required for this print.I recommend printing with a 5mm wide brim of one layer heights spaced .1mm from the parts to ensure that the parts stick correctly to the print bed whilst printing, Infill 15%.Total print time 10 to 15h.The parts list is as follows:

BODY x1BACK COVER x1FACE x1HAT x1ARMSERVO x2ARM x2ARM PIN x2FOREARM x2BATTERY HOLDER x1BATTERY SERVO HOLDER x1BATERY SERVO ARM ATTACHEMENT x1FOOT DISK x2BIG CLIP x2SMALL CLIP x7SMALL CROSS CLIP x2

TOTAL PARTS: 28