A couple of little chick sits snugly inside an Easter egg. This adorable Easter-themed design captures the joy and warmth of the season. It makes a delightful decoration or gift, perfect for celebrating Easter with a touch of cuteness.

There are 2 varients of this model available:

1. Bow Tie
2. Cute Head Ribon

Make sure to upload a make after printing, I'll love to see them.

Happy Printing:)

3D printing settingsSTL and 3MF files are included. If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.

Print-in-Place, No supports needed.

Multicolor 3MF

0.2 Layer height ( Use 0.12 or 0.16 layer height for better quality)

10%-15% Infill (I recommend Gyroid, Honeycomb or Grid)

2 Walls (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)

Make sure you have good adhesion.

I tested this model on scale of 50% to 200%, I do not suggest smaller than 60% for the model. ( I printed it on 80% scale )

Happy Printing :)