A recreation of Aerith's weapon from the Final Fantasy VII remake.

It's life-size and will be 1.6 meters long when fully assembled.

There are two 13mm diameter holes for balls to be inserted as materia. A file is included if you want to print these, I'd recommend a coloured resin. Alternatively any same size sphere will work. Another 3D printed piece is fitted over the top to hold it in place.

Has a central hollow for a 17mm bar for extra strength.

Each can be printed vertically on an Ender 3 size printer with no supports. Some parts will need good bed adhesion as they're thin and tall.

The pieces lock together using screw thread for a secure fit. The screws can then be glued for a permanent attachment, or left detachable for easier transporting. If your slicer supports height range modifiers then I would recommend printing the screws at 100% infill for strength.

The threads are designed with a .2mm clearance, which gives a moveable but solid fit on my stock CR-10S Pro V2. You may need to sand the threads if your prints need more clearance.