A life sized replica of the large revolver from the first Premium Warbond.

38cm/15in long and 3cm/1.5in wide across the grip. This is modelled after the extended barrel version. The cylinder can rotate, but no moving trigger or hammer.

A few pieces will need supports. The trigger guard might on the orientation you print it in. The rear frame needs some to support the cutout for the rear sight. Tree supports work great.

For the rear frame, it's designed so you can pause the print before the large bridging sections near the top. Then insert the Cylinder Base into the cut outs, make sure the divot faces down and resume the print. This ensures you don't need supports.

The pieces are glued together and have a .2mm clearance which should be sufficient for any average printer.

Included is a .3mf file with the pieces in the correct orientation.