Tablet stand240mm wide from each side, approx.19 mm socket where the tablet is inserted, approx 90 mm height on tablet back support.NO supports needed, no hassle or assembly!!

Fits with tablet cover, and stops the flip cover in the back.

Settings: PLA, PETG, other. Recommend infill pattern: Cubic (for faster prints min 10%) or Grid (minimum 15%). Layer height max: 0.4 nozzle @ 0.30Layer height max: 1.0 nozzle @ 0.70Rafts: NoSupports: NoResolution recommended: 0.4nozzle @ 0,26Infill: 10% Cubic /or/15% GridFilament material: PLA, otherNotes: 2 walls / 2 shells

Approx Print time: 3-4hours depending on print speed used (I used 60mms on this @ 4,5 hours). Reduce that time by 60% with 1.0 nozzle, but resolution will suffer.

This product has had over 1000 downloads within 6months at a different site. Approx 167 downloads a month. Buy, download, print and either use it yourself or give away as present!