This cable channel is a great solution for keeping unsightly cables out-of-the-way and organized. It creates a triangular shape indent for all the cables to run through. This is also a modular system with dovetail mounts, so depending on the size of your printer you can print different sizes and slot them together to create the desired length.

Print Instructions

• Material: PLA or PETG (for extra strength)
• Supports: No
• Orientation:
• Print everything on its back

Pieces

• End Piece 1 (50 mm in length)
• End Piece 2 (50 mm in length)
• Middle Piece (in lengths of 100 mm, 150 mm, 200 mm and 250 mm)
• Screws or mounting tape (in the files the shaft diameter of the screw is 5 mm and the head diameter is 10 mm with a head thickness of 5 mm) (not included)

Installation

• Print the amount of pieces you need
• Assemble the pieces with the dovetail joints
• Lay the cables inside the channel
• Screw or tape the cable channel to the wall (if you are screwing into drywall, you may want to use drywall anchors)
• To add another cable you can try to slide it through or unmount the channel, add it, and remount the cable channel

If you enjoy this model, please leave a like and a comment. If you have any questions, concerns, or problems, please personally contact me.