DESCRIPTION

One drawer the size of a shoebox — for the kit that has outgrown a compartment box.

WHAT IT IS186 mm of front width, full height, 145 mm deep, so a whole project can live in one place — models in progress, a full set of bottles, sculpting materials, or the pile that builds up during a session. It comes right out of the enclosure and carries a finger notch at the front.

AT A GLANCEEnclosure: 200 × 150 × 150 mm (W × D × H)Drawer: 1x — 186 × 145 × 136 mm (W × D × H)Module: Large, 200 mm footprintMagnets: 6 mm disc magnets in the side pockets (optional)Printing: no supports required

INCLUDED• Enclosure, printed in one piece• 1 × drawer, 186 × 145 × 136 mm• Window-front drawer body and one infill pane (optional build)

BUILT TO COMBINE

Every unit in this range is built on the same two rules: a shared footprint grid, and a shared magnet pattern. Units sit flush with their neighbours and lock there with 6 mm disc magnets seated in the side pockets, so a row stays a row while you pull drawers in and out of it. Drawer blocks, top units, racks and holders all use that same grid, which is what lets a bench grow a unit at a time and still line up.

WINDOW FRONTS

Some drawers in this range are available with a window front: a separate drawer body with an aperture, rather than a cut into the solid front. Each window body takes one infill pane behind its face, cut to that drawer's own window — panes are specific to a drawer size, and come in six patterns: plain, diamond, grid, hex, circle and brick.

On this unit: One pane for its single window drawer.

PRINT NOTES

Files are modelled full size in millimetres and print without supports on a typical FDM machine. Magnets are optional — the pockets can be left empty, in which case units simply stand beside each other instead of locking. Print at 100%: the magnet pockets and the module depend on it, so scaling is not supported.

LICENCE

The files are for personal use only. You may not resell, share or redistribute the digital files, and you may not sell physical prints made from them. Independent design, no affiliation with any other company.

REVIEWS & COMMENTS

See what other buyers think about this model - real feedback on quality,
accuracy, and usability.
BEST PRICE GUARANTEED
Found this model cheaper on another marketplace? Let our support team know - we’ll match it.

015L LA Unit Large Single Drawer 3D print model

Custom License (no AI)
$3.00
Like this model to show appreciation to the designer.
See how many times this model was viewed.
Share this model to support the designer and boost their visibility.
File formats
STL
Stereolithography | 3 files<br />File Size: 911 KB
OBJ
OBJ | 2 files<br />File Size: 738 KB
Provided by designer
Information and details shared directly by the model's designer.
3D printing
Indicates whether the designer marked this model as suitable for 3D printing.
Model is prepared for 3D printing
The designer indicates this model is prepared for physical 3D printing and includes printable file formats.
Units
Publish date
Model ID
Chat