Milwaukee Brewers Stand Logo 3D print model

3D MODEL DESCRIPTION Hello friend, today I brought on my profile, a fantastic logo, in my opinion very nice, it was a request of my dear friend, in fact the photo is his, and is nothing short of gorgeous.

Awesome Milwaukee Brewers logo.

If you have a logo in mind, which you like, but you haven’t found it around the web, contact me in the messages section, so I can satisfy your wishes.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good press friend for anything, contact me via messages.

3D PRINTING SETTINGS Layer 0.15 / 0.20 Temp 205° / 50° PLA --- 230° / 65° PETG Infill 10% Top and Bottom Layer 4 Perimeter Layer 3 No support Speed 50/60 mm/s