3D MODEL DESCRIPTIONHello friend, today I wanted to bring on my profile, another project on Harry Potter, the famous stand that indicates the Binary, I made another time ago, but this, unlike the first, is fully assembled, so, you can print it with various colors of PLA, so as not to resort to colors.

The holes for the stand, are 5 mm, you need 4 fischer to fix it to the wall.

The dimensions can be found in the print example photos, as well as the very few media that you will use only and exclusively for the frame.

As a printing advice, I recommend that you print the frame platform with a filling of 5%, instead the stand that must be fixed to the wall, 20% of filling, so that you have greater resistance when you go to hang the logo, the rest of the components you can print them at 7% maximum 10% for letters.

For the layers I recommend a 0.15, so as to obtain an excellent result, and a smooth effect.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good press friend for anything, contact me via messages.

3D PRINTING SETTINGSLayer 0.15Temp 205° / 50° PLA --- 230° / 65° PETGInfill 5% -- 7% -- 10%Top and Bottom Layer 4Perimeter Layer 3Support View PicturesSpeed 50/60 mm/s