This is a 3D print file NOT A REAL PHYSICAL PRODUCT.

Monster skulls 3D printable models.

5 different skulls each with and without horns.
Horned versions also with detachable horns to save printing time on resin printers.
For each version is also included hollowed version with drainage holes.

Recommended for resin printers.
While it can be also printed on FDM it needs at least some experience.
FDM supports are needed only on the bottom but supporting the teeth on some skulls can be tricky (but doable).

Photos shown are resin prints printed on Elegoo Mars with Elegoo gray resin at 100% scale - 50-68mm (2.68in) tall and smaller 50% scale.

STL

• Ready to print STLs. Polycounts about 250k - 400k tris.
• I also included one Chitubox Project file (1.6.3) for you to inspect how I placed supports.

OBJ

• Same as STL
• And hi-poly (millions of polys) non-decimated sculpts - source objects if you want to resculpt it etc.

ZTL

• Sculpted in Zbrush 2019.
• Included ZTL contains original non-decimated separate subtools with subdivisons.
• Decimated ready to export and print subtools also included.

If you have any questions you can send me a message (on the right side - letter icon).