Leaves leaf 3D print model

Print ready leaves.

Measure units are millimeters, the wall thickness is about between 1.1-15 mm. (1.1 mm for the smaller leaf.)

Mesh is manifold, no holes, no inverted faces, no bad contiguous edges.

Available formats: .blend, .stl, .obj, .fbx, .dae

Here is one and two leaves versions.

1) One_Leaf (.blend, .stl, .obj, .fbx, .dae) 2) Two_Leaf (.blend, .stl, .obj, .fbx, .dae)