H
hristo-statev0794 2024-01-29 05:26:59 UTChristo-statev0794
Well done
Useto navigate. Pressescto quit
Deinonychus Skull 3D print model
Description
Hi guys,
this is my sculpt of a Deinonychus Skull (based on the late 60s reconstruction of John Ostron)
The fossil is split up in different parts/fragments (no need for filling gaps)
Size of the skull: 400mm x 235mm 168mm
Printer: Creality CR-10
Nozzle: 0,4mm
Layer: 0,1mm
Speed: 50mm/s
Infill: 10%
Support: yes
I concepted the skull to be mounted on a 6mm diameter metal rod.
If there are any questions left feel free to ask.
Have fun printing !
C
coreykennedy 2021-01-02 02:06:41 UTCcoreykennedy
Can the pieces be printed with a printer whose print volume is 150cmx150cmx150cm?
arric
Hello, here's a list of the biggest parts.
As you can see, this model can't be printed 1:1 scale with your printer.
"Mandible Part 2"= 220x47x50mm
"Mandible Part 3"= 217x56x42mm
"Skull Part 7"= 211x130x160mm
"Skull Part 8"= 219x64x73mm
J
jcskehan 2021-08-01 09:07:55 UTCjcskehan
If you cut the Upper Jaw 3 in half in mesh-mixer, right down the middle, then you can print the whole thing at 50% scale on a mono SE.
VeniaminAndrei
amazing
J
jimvision jimvision
Excellent model. I have printed and painted this model and it went together very well. Used the Anycubic Photon Mono M5s 3D printer with Anycubic's high speed resin. All pieces came out perfectly. Thank you!
D
dreamer-md dreamer-md
Thank you for a wonderful model of a Deinonychus Skull.....my next project.
A
australovenator australovenator
Similar Models
to Deinonychus Skull
