StormTrooper V2 3D Print Ready Helmet 3D print model

ANH Storm Trooper V2

This is a more refined helmet, separate ears, sharper details and overall a much much better print than our previous helmet (which has had over 120 printed and made.) It is also cut for a larger printer.

We have done everything for you!All pieces are cut and repaired using a professional grade repairing tool, all pieces are placed dead flat at 0,0,0 on the build surface for you.

We have tried very very hard to ensure all you need to do is load the file, select your settings and press print.We include comprehensive instructions for all parts (the assembly guide has been uploaded for your viewing)Helmet sliced for CR-10 *

EDIT OCT 2018Included an 8-piece cut version for Ender3 and similar printers.


LAYER HEIGHT: Since parts will be sanded and painted, we suggest 0.2-0.3mm layer height with minimum 2 perimeters. Supports will be needed on some parts, but not all.

We suggest the 8 part version for the least supports (however this requires more assembly )

  • GeoffroGeoffro
    2018-07-11 00:11
    Tomtom887 - you got your product, how is it a waste of money because we took longer to reply to an email (on the weekend no doubt) and because we didn't cut it into smaller pieces for you? most people have figured out how to do this now with windows 10 as its a built in function.
    • ttomtom887
      2018-09-13 10:57
      You only replied on the Wednesday because I left a neg review. Wednesday is not the weekend (4 days later from when I left the review). Please don't b*tch about having to do it for free and how I'm supposed to have the software because it's in windows 10. Not everybody uses 10. If you're going to whinge about having to do a large amount of free unpaid work. Why do you put it on your ad?
      • GeoffroGeoffro
        2018-09-13 15:09
        We don't give the option to people anymore thanks to the experience with you anyway, so effectively they can all thank you for that. Usually I would honestly care but to get a negative rating not because of the model, but because you were impatient is quite unfair and you know it. As for what software to use to cut models up, I believe if you go to google and type in "how to cut up 3D models for printing" it might give you some clues, sorry I was not of more help there in something so complicated.
    • GeoffroGeoffro
      2018-07-11 00:15
      40% of the advert? it's one sentence ... If we are going to get our only negative rating because you couldn't wait a short time for us to do a large amount of free, unpaid work for you... then I guess we will just have to take this one. I'm not going to bend over backwards to help someone who does that.
      • mmel-gaudreault
        2020-09-02 13:28
        Hi, Can you tell me the size of each part? Does it's a wearable size? I need to know if i can print it on my 3D printer. Thanks you!
        • mmel-gaudreault
          2020-09-02 13:28
          Hi, Can you tell me the size of each part? Does it's a wearable size? I need to know if i can print it on my 3D printer. Thanks you!
          • lleidermanmartinez
            2020-09-17 00:28
            Hola, compre este casco y quisiera saber si hay un instructivo de como pegar las 8 partes ya que en la foto no se muestra, gracias
            Item Rating61
            • sspooky1979
              2020-07-29 16:27
              very good quality, lots of details, I recommend it!
            • tontonedtontoned
              2018-09-13 09:31
              tres beau travail. Merci
            • nnicoolai
              2018-09-03 05:54
            • ttomtom887
              2018-07-10 21:48
              Not Recommended
              40% of their advert talks about help and how they’re here to help. I needed the file slicing to fit a smaller print bed. Emailed twice for help. Ignored! Waste of money.
            • rraffnixx
              2018-07-08 19:43
            StormTrooper V2 3D Print Ready Helmet
            All prices are exclusive of VAT
            Send your price offer to the author if you want to buy it at lower price.
            Editorial License
            The product can only be used in an editorial manner (educational, non-commercializable<br/> personal project, in newsworthy and of public interest events) and may not be used for any<br/> commercial, promotional, or merchandising purposes.<br/> <a href='/pages/terms-and-conditions#general-terms-of-licensing' rel='nofollow' target='_blank'>Read more</a>
            Response 51% in 48.0h
            3D Modeling
            3D Print Modeling
            Low-poly Modeling
            UV mapping
            Hire me
            3D model formats
            • Stereolithography (.stl) (16 files)-
            3D model details
            • Publish date2018-01-21
            • Model ID#835114