As seen in Batuu - Galaxys Edge park, up in the high tops of the Marketplace area. So cool! I have cut this up to be printed for full scale. Printable on smaller printers.
Galaxys Edge Ceiling Decoration 3D Print STL File:
This listing includes digital files only; no physical items will be shipped.Due to the digital nature of the product, refunds or exchanges are not available.
Dimensions (see pics): I cannot give dimensions due to being able to make it infinitely - approx. mm x 16mm thick x mmBut you can scale it to your printer bed size!
Assembly:
- Print out all the files that you need.
- See pics and video for assembly
- I will give quantities to create one part.
- QTY 2 Hook
- QTY 2 RoundEnd
- QTY 4 Straight
- QTY 4 Connector
- QTY 14 Pins
- QTY 1 Straight-Connector_1
- QTY 1 Straight-Connector_2
- QTY 1 Straight-Connector_1-END
- QTY 1 Straight-Connector_2-END
- QTY 6 Plates of your choice
- Lets Start with the inner area:
- Start with the RoundEnd and add two square pins
- Then place two straight pieces on each side with a pin
- Ending with the RoundEnd
- Glue when ready
- Flip upside down
- Starting at one end Now add 4 Connectors to the underside of the RoundEnd pieces
- Then for the dead end add the Straight-Connector_1-END and Straight-Connector_2-END
- The ends without a hole for the Pins should be in line with the RoundEnd
- Add two more Straight pieces to each side with the pins
- Then Straight-Connector_1 and Straight-Connector_2
- Add pins and then the Hook
- Be careful on which way the hooks are facing (See pics)
- The plates are meant to hold everything together and give it more strength
- They are also meant to space each section together using the width of the plate
- AT THE TOP AND BOTTOM ENDS ONLY - The Plates are also used to give strength to connect the center piece and end. The plates will not be flush when doing this. (See pics)
- Glue everything together when your ready!
- If you look at some of the pictures from the park you can see that they do not mount this freely hanging, but uses some type of metal structure to hold these up.
- I can imagine hanging this from ceiling with wire rope or chains to give a cool look.
Enjoy!
Please let me know of any issues.
Whitey!
Photo Credit: Sorry I do not remember where I got the pictures so if you own them please let me know and I will post your name/and/or company. Thanks!
Join My Patreon for over 250 Awesome STL-DXF-SVG files and counting.Patreon=WhiteysWickedWorkshop
